10-2 12V Wire
12V 10-gauge, 2-conductor wire. 250-foot roll.
$162.50
12-2 12V Wire
12V 12-gauge, 2-conductor wire. 250-foot roll.
$112.50
Wire Connectors
The best way to ensure a permanent connection is to use silicone-filled connectors. These King connectors are made for direct burial installation and can handle a broad range of wire sizes. You will need 2 per fixture and they are priced each.
$1.26
F33 Pale Blue MR16 Lens
This pale blue lens for MR16 fixtures creates a subtle moonlight effect. The hint of blue takes out just enough of the yellowish tint from the halogen lamp to provide a cooler look to your landscape. Fits directly on top of the MR16 lamp (2" diameter).
$10.00
F66 Pale Green MR16 Lens
This pale green lens is the closest to the mercury vapor color you can get with 12 volt lighting. It filters out the yellowish tint from the halogen lamp and makes your trees look really green. Fits directly on top of the MR16 lamp (2" diameter).
$10.00
F22 Red MR16 Lens
This bright red lens for MR16 fixtures creates the perfect color red for the holidays. Fits directly on top of the MR16 lamp (2" diameter).
$10.75
F44 Green MR16 Lens
This deep green lens for MR16 fixtures creates the perfect color green for the holidays. Fits directly on top of the MR16 lamp (2" diameter).
$10.75
DIF Diffused MR16 Lens
This sandblasted tempered glass lens softly diffuses the light and fits directly on top of the MR16 lamp (2" diameter).
$10.00
LVR Honeycomb MR16 Lens
This hex cell louver reduces the glare from any MR16 lamp, and fits directly on top of the lamp (2" diameter).
$10.00
OSL Overall Spread MR16 Lens
The Overall Spread Lens increases the beam spread on any MR16 lamp. The light is evenly distributed and somewhat diffused for a softer effect. Fits directly on top of the MR16 lamp (2" diameter).
$10.00
LSL Linear Spread MR16 Lens
The Linear Spread Lens creates an elongated beam pattern. Depending on which direction the lines of the lens are placed, it distributes the light vertically or horizontally. Fits directly on top of the MR16 lamp (2" diameter).
$10.00
MR16 Lens Clip
This clip makes it possible to add a colored or spread lens to any MR16 fixture. The lens will "clip" into this clip and then the entire unit will clip onto the front of the lamp. Most fixtures do not require a lens clip to use a lens, but you will need them for the: BL5016, LVBAS, RL116, or the IL116G-H.
$8.85
MC1 Round Surface Mount
This low voltage surface mount is perfect for mounting fixtures on eaves, decks, or walls. It has a 1/2" NPS threaded fitter and works will all of our fixtures. 2-7/8" [73mm] round diameter.Low voltage mounting canopy. Cast aluminum with 1/2" [13mm] NPS threads.
$13.00
Color
S3 120V Stake
Rocket Perma Post ensures a sturdy and permanent mount for any 120V path or uplight. These 3" O.D. and 19"L stakes are made of heavy, impact-resistant PVC material. They have a 1/2" threaded hub and include a ground wire.
$31.80
S6 12V Adjustable Stake
This low voltage telescoping stake is ideal for use in fast growing, annual beds. Telescopic low voltage stake. Constructed of non-corrosive PVC. Field adjustable 2"-14" [51mm-356mm] above ground. Ideal for use in fast growing annual beds. Cap has 1/2" NPS threads for mounting fixture.
$24.65
S7 12V Stake
Two-piece low voltage mounting stake. PVC stake 1-3/8" [35mm] O.D. x 9-1/2" [241mm] long with integral 1/2" [13mm] NPS fitter. Includes ABS, removable 1/2" NPS [13mm] cap to mount fixture.
$7.65
MA4 Compound Protectant
Specially formulated non-conductive sealant and corrosion compound. For best maintenance results, add a dab to light sockets and electrical contacts at installation and when you change a lamp. 2 oz. tube.
$18.00
IG3H Rock Guard
Rockguard with lens for the IL336 inground fixture.
$43.75
IL3H Ring Guard
Lens guard for the IL336 inground.
$45.25
FH215 - KLV215 Shield
3 sided shield used to provide glare control for the KLV215 floodlight.
Color
$19.80
B5-2V 4 Hole Box
4-hole aluminum bell box
$3.85
B5-22V 5 Hole Box
5 hole aluminum bell box
$4.45
BC-1V Blank Cover
Aluminum blank cover to fit the B5-2 4 hole box, or the B5-22 5 hole box.
$0.95
1234-12 1/2" Cord Grip
Kleinhuis 1/2-inch cord grip. Use to waterproof knockouts where wires enter. Great to use on low voltage transformers and ballast boxes. You will also need a locknut (1420/12) if you are not screwing the cord grip into a treaded base (like a bell box).
$1.45
1420-12 1/2" Locknut
To be used with the 1234/12 cord grip. Used to secure the cord grip in place when it is not being screwed into a threaded base.
$0.50
2101 2000W Photocell
Tork 2000W photocell with 1/2" threaded base.
$20.50
AT30 3000W Photocell
Area Lighting Research 3000W photocell with 1/2" treaded mount.
$23.75
Hex Nuts for Tree Bolts
1/4-20 Hex Nuts, 200 per bag. Use these hex nuts with the 3" long hanger bolts to secure ballast boxes, junction boxes, etc. to trees or any other material.
$10.00
Tree Bolts
1/4" x 3" long hanger bolts, 100 per bag. Use these bolts (with 2 hex nuts per bolt), to secure ballast boxes, junction boxes, etc. to trees, fences, etc.
$19.00
Tree Staples
Plastic "c" shaped staples used to secure wire to a tree, fence, gazebo, etc. 100 per box.
$9.00
T101R Timer
Single Pole/Single Throw 120V outdoor rated timer.
$104.00
Installation Hardware & Accessories
TM Tree Mount
Standard TM Tree Mount. Includes all mounting hardware (4" tree bolts, hex nuts, back plate, etc). Has 1/2" NPSM threads. Can be used for 12V or 120V installations. For more info visit the Moon Visions link on the left.
Color
$10.50
16-3 120V Wire
120V 16-gauge, 3-conductor wire. 250-foot roll.
$95.00
ASM 3 Sided Shield
3 Sided half shield designed to fit the ASM Medium Flood Light. Half Shield will help conceal the light source, without impeading the light output.
Color:
$22.50
SM1 Surface Mount
Specification grade surface mount for use with low voltage lighting fixtures. Machined from high grade aluminum for lasting performace and appearance. Supplied with machined lock nut and stainless steel mounting screws. Mounting is 1/2 NPS Thread. Diameter = 2.25" Depth = 1.00"
$27.00
Color:
Tree Mount Box
Larger Box style tree mount. Includes all mounting hardware (4" tree bolts, hex nuts, back plate, etc). Larger box includes a Neoprene Gasket and 1/2-14 NPT inlet thread for cord grip/seal tite attachment. For low voltage applications, use TMB box to house TE-12-75 watt transformer. Available in Antique Bronze (B) only. For more info visit the Moon Visions link on the left.
$16.10